HOW DID HE KNOW..
Well here i go.
INHALE
Armour-piercing fin-stabilized discarding sabot (APFSDS), long dart penetrator, or simply dart ammunition, is a type of kinetic energy penetrator ammunition used to attack modern vehicle armour. As an armament for main battle tanks, it succeeds Armour-Piercing Discarding Sabot (APDS) ammunition, which is still used in small or medium caliber weapon systems.

Improvements in powerful automotive propulsion and suspension systems following World War II allowed modern main battle tanks to incorporate progressively thicker and heavier armor, while maintaining considerable maneuverability and speed on the battlefield. As a result, achieving deep armour penetration with gun-fired ammunition required even longer anti-armour projectiles fired at even higher muzzle velocity than could be achieved with stubbier APDS projectiles.

History

Armour-piercing discarding sabot (APDS) was initially the main design of the kinetic energy (KE) penetrator. The logical progression was to make the shot longer and thinner to concentrate the kinetic energy in a smaller area. However, a long, thin rod is aerodynamically unstable; it tends to tumble in flight and is less accurate. Traditionally, rounds were given gyroscopic stability in flight from the rifling of the gun barrel, which imparts a spin to the round. Up to a certain limit, this is effective, but once the projectile's length is more than six or seven times its diameter, the gyroscopic effect imparted by barrel rifling becomes less effective.[1] Adding fins to the base of the round like the fletching of an arrow instead gives the round its stability in flight.[2]

The spin from standard rifling decreases the performance of these rounds (rifling adds friction and converts some of the linear kinetic energy to rotational kinetic energy, thus decreasing the round's velocity, range and impact energy). A very high rotation on a fin-stabilized projectile can also increase aerodynamic drag, further reducing impact velocity. For these reasons APFSDS projectiles are generally fired from smoothbore guns, a practice that has been taken up for tank guns by China, India, Israel, Italy, Japan, France, Germany, Pakistan, Turkey, Russia, and the United States. Nevertheless, in the early development of APFSDS ammunition, existing rifled barrel cannons were used, (and are still in use), such as the 105 mm M68/M68E1 cannon mounted on the M60/A1/A3 main battle tank or the British 120 mm Royal Ordnance L30 of the Challenger 2 tank. To reduce the spin rate when using a rifled barrel, a "slip obturator", (slip obturation ring), is incorporated that allows the high pressure propellant gasses to seal, yet not transfer the total spin rate of the rifling into the projectile. The projectile still exits the barrel with some residual spinning, but at an acceptably low rate. In addition, some spin rate is beneficial to a fin-stabilized projectile, averaging out aerodynamic imbalances and improving accuracy. Even smooth-bore fired APFSDS projectiles incorporate fins that are slightly canted to provide some spin rate during flight; and very low twist rifled barrels have also been developed for the express purpose of firing APFSDS ammunition.

Design

Modern 120 mm tank gun shells

KE penetrators for modern tanks are commonly 2–3 cm (0.787–1.18 in) in diameter, and can approach 80 cm (31.5 in) long. As more structurally-efficient penetrator-sabot designs are developed their length tends to increase, in order to defeat even greater line-of-sight armour depth. The concept of armour defeat using a long rod penetrator is a practical application of the phenomenon of hydro-dynamic penetration.[3]

Fluid penetration

Despite practical penetrator and target materials not being fluids before impact, at sufficiently high impact velocity even crystalline materials begin to behave in a highly plastic fluid-like manner, so many aspects of hydro-dynamic penetration do apply.[4][5]

Long rod projectiles penetrate a fluid in the literal sense, based simply on the density of the target armour and the density and length of the penetrator. The penetrator will continue to displace the target to a depth of the penetrator length times the square root of the penetrator to target densities. One observes immediately that longer, denser penetrators will penetrate to deeper depths, and this forms the basis for the development of long-rod anti-armour projectiles.[4]

The important parameters for an effective long-rod penetrator, therefore, are very high density with respect to the target, high hardness to penetrate hard target surfaces, very high toughness (ductility) so the rod does not shatter on impact, and very high strength to survive gun launch accelerations, as well as the variabilities of target impact, such as hitting at an oblique angle and surviving counter-measures such as explosive-reactive armor.[4]

Tungsten and depleted uranium

While penetrator geometry has adapted to reactive armour counter-measures, tungsten heavy alloy (WHA) and depleted uranium (DU) alloy continue to be preferred materials. Both are dense, hard, tough, ductile, and strong; all exceptional qualities suitable to deep armor penetration. Each material exhibits unique penetration qualities that may make it the best choice for a particular anti-armor application.

Depleted uranium alloy, for example, is pyrophoric; the heated fragments of the penetrator ignite after impact in contact with air, setting fire to fuel and / or ammunition in the target vehicle, contributing significantly to behind-armour lethality. Additionally, DU penetrators exhibit significant adiabatic shear band formation. A common misconception is that, during impact, fractures along these bands cause the tip of the penetrator to continuously shed material, maintaining the tip's conical shape, whereas other materials such as unjacketed tungsten tend to deform into a less effective rounded profile, an effect called "mushrooming". The formation of adiabatic shear bands actually means that the sides of the "mushroom" tend to break away earlier, leading to a smaller head on impact, though it will still be significantly "mushroomed".

Tests have shown that the hole bored by a DU projectile is of a narrower diameter than for a similar tungsten projectile. Although both materials have nearly the same density, hardness, toughness, and strength, due to these differences in their deformation, depleted uranium tends to out-penetrate an equivalent length of tungsten alloy against steel targets.[6] The use of depleted uranium, in spite of some superior performance characteristics, provokes political and humanitarian controversy, but remains the preferred material for some countries due to lower cost and greater availability than tungsten.

Sabot design

Typical velocities of the APFSDS rounds vary between manufacturers and muzzle length/types. As a typical example, the American General Dynamics KEW-A1 has a muzzle velocity of 1,740 m/s (5,700 ft/s).[7] This compares to 914 m/s (3,000 ft/s) for a typical rifle (small arms) round. APFSDS rounds generally operate in the range of 1,400 to 1,800 m/s (4,593 to 5,906 ft/s). Above a certain minimum impact velocity necessary to overcome target material strength parameters significantly, penetrator length is more important than impact velocity; as exemplified by the fact that the base model M829 flies nearly 200 m/s (656 ft/s) faster than the newer model M829A3, but is only about one half the length, wholly inadequate for defeating state-of-the-art armor arrays.[citation needed]

Complicating matters, when foreign deployment of military forces or export sales markets are considered, a sabot designed specifically to launch a DU penetrator cannot simply be used to launch a substitute WHA penetrator, even of exactly the same manufactured geometry. The two materials behave differently under high pressure, high launch acceleration forces, such that entirely different sabot material geometries, (thicker or thinner in some places, if even possible), are required to maintain in-bore structural integrity.[citation needed]

Often the greater engineering challenge is designing an efficient sabot to successfully launch extremely long penetrators, now approaching 80 cm (31 in) in length. The sabot, necessary to fill the bore of the cannon when firing a long, slender flight projectile, is parasitic weight that subtracts from the potential muzzle velocity of the entire projectile. Maintaining the in-bore structural integrity of such a long flight projectile under accelerations of tens of thousands of g's is not a trivial undertaking, and has brought the design of sabots from employing in the early 1980s readily available low cost, high strength aerospace-grade aluminums, such as 6061 and 6066-T6, to high strength and more expensive 7075-T6 aluminum, maraging steel, and experimental ultra-high strength 7090-T6 aluminum, to the current state-of-the-art and expensive graphite fiber reinforced plastics, in order to further reduce the parasitic sabot mass, that could be nearly half the launch mass of the entire projectile.[7]

The discarding sabot petals travel at such a high muzzle velocity that, on separation, they may continue for many hundreds of feet at speeds that can be lethal to troops and damaging to light vehicles. For this reason, tank gunners have to be aware of danger to nearby troops.

The saboted flechette was the counterpart of APFSDS in rifle ammunition. A rifle for firing flechettes, the Special Purpose Individual Weapon, was under development for the US Army, but the project was abandoned.

HOW DID HE KNOW..
Well here i go.
*INHALE*
Armour-piercing fin-stabilized discarding sabot (APFSDS), long dart penetrator, or simply dart ammunition, is a type of kinetic energy penetrator ammunition used to attack modern vehicle armour. As an armament for main battle tanks, it succeeds Armour-Piercing Discarding Sabot (APDS) ammunition, which is still used in small or medium caliber weapon systems.

Improvements in powerful automotive propulsion and suspension systems following World War II allowed modern main battle tanks to incorporate progressively thicker and heavier armor, while maintaining considerable maneuverability and speed on the battlefield. As a result, achieving deep armour penetration with gun-fired ammunition required even longer anti-armour projectiles fired at even higher muzzle velocity than could be achieved with stubbier APDS projectiles.

History
Armour-piercing discarding sabot (APDS) was initially the main design of the kinetic energy (KE) penetrator. The logical progression was to make the shot longer and thinner to concentrate the kinetic energy in a smaller area. However, a long, thin rod is aerodynamically unstable; it tends to tumble in flight and is less accurate. Traditionally, rounds were given gyroscopic stability in flight from the rifling of the gun barrel, which imparts a spin to the round. Up to a certain limit, this is effective, but once the projectile's length is more than six or seven times its diameter, the gyroscopic effect imparted by barrel rifling becomes less effective.[1] Adding fins to the base of the round like the fletching of an arrow instead gives the round its stability in flight.[2]

The spin from standard rifling decreases the performance of these rounds (rifling adds friction and converts some of the linear kinetic energy to rotational kinetic energy, thus decreasing the round's velocity, range and impact energy). A very high rotation on a fin-stabilized projectile can also increase aerodynamic drag, further reducing impact velocity. For these reasons APFSDS projectiles are generally fired from smoothbore guns, a practice that has been taken up for tank guns by China, India, Israel, Italy, Japan, France, Germany, Pakistan, Turkey, Russia, and the United States. Nevertheless, in the early development of APFSDS ammunition, existing rifled barrel cannons were used, (and are still in use), such as the 105 mm M68/M68E1 cannon mounted on the M60/A1/A3 main battle tank or the British 120 mm Royal Ordnance L30 of the Challenger 2 tank. To reduce the spin rate when using a rifled barrel, a "slip obturator", (slip obturation ring), is incorporated that allows the high pressure propellant gasses to seal, yet not transfer the total spin rate of the rifling into the projectile. The projectile still exits the barrel with some residual spinning, but at an acceptably low rate. In addition, some spin rate is beneficial to a fin-stabilized projectile, averaging out aerodynamic imbalances and improving accuracy. Even smooth-bore fired APFSDS projectiles incorporate fins that are slightly canted to provide some spin rate during flight; and very low twist rifled barrels have also been developed for the express purpose of firing APFSDS ammunition.

Design

Modern 120 mm tank gun shells
KE penetrators for modern tanks are commonly 2–3 cm (0.787–1.18 in) in diameter, and can approach 80 cm (31.5 in) long. As more structurally-efficient penetrator-sabot designs are developed their length tends to increase, in order to defeat even greater line-of-sight armour depth. The concept of armour defeat using a long rod penetrator is a practical application of the phenomenon of hydro-dynamic penetration.[3]

Fluid penetration
Despite practical penetrator and target materials not being fluids before impact, at sufficiently high impact velocity even crystalline materials begin to behave in a highly plastic fluid-like manner, so many aspects of hydro-dynamic penetration do apply.[4][5]

Long rod projectiles penetrate a fluid in the literal sense, based simply on the density of the target armour and the density and length of the penetrator. The penetrator will continue to displace the target to a depth of the penetrator length times the square root of the penetrator to target densities. One observes immediately that longer, denser penetrators will penetrate to deeper depths, and this forms the basis for the development of long-rod anti-armour projectiles.[4]

The important parameters for an effective long-rod penetrator, therefore, are very high density with respect to the target, high hardness to penetrate hard target surfaces, very high toughness (ductility) so the rod does not shatter on impact, and very high strength to survive gun launch accelerations, as well as the variabilities of target impact, such as hitting at an oblique angle and surviving counter-measures such as explosive-reactive armor.[4]

Tungsten and depleted uranium
While penetrator geometry has adapted to reactive armour counter-measures, tungsten heavy alloy (WHA) and depleted uranium (DU) alloy continue to be preferred materials. Both are dense, hard, tough, ductile, and strong; all exceptional qualities suitable to deep armor penetration. Each material exhibits unique penetration qualities that may make it the best choice for a particular anti-armor application.

Depleted uranium alloy, for example, is pyrophoric; the heated fragments of the penetrator ignite after impact in contact with air, setting fire to fuel and / or ammunition in the target vehicle, contributing significantly to behind-armour lethality. Additionally, DU penetrators exhibit significant adiabatic shear band formation. A common misconception is that, during impact, fractures along these bands cause the tip of the penetrator to continuously shed material, maintaining the tip's conical shape, whereas other materials such as unjacketed tungsten tend to deform into a less effective rounded profile, an effect called "mushrooming". The formation of adiabatic shear bands actually means that the sides of the "mushroom" tend to break away earlier, leading to a smaller head on impact, though it will still be significantly "mushroomed".

Tests have shown that the hole bored by a DU projectile is of a narrower diameter than for a similar tungsten projectile. Although both materials have nearly the same density, hardness, toughness, and strength, due to these differences in their deformation, depleted uranium tends to out-penetrate an equivalent length of tungsten alloy against steel targets.[6] The use of depleted uranium, in spite of some superior performance characteristics, provokes political and humanitarian controversy, but remains the preferred material for some countries due to lower cost and greater availability than tungsten.

Sabot design
Typical velocities of the APFSDS rounds vary between manufacturers and muzzle length/types. As a typical example, the American General Dynamics KEW-A1 has a muzzle velocity of 1,740 m/s (5,700 ft/s).[7] This compares to 914 m/s (3,000 ft/s) for a typical rifle (small arms) round. APFSDS rounds generally operate in the range of 1,400 to 1,800 m/s (4,593 to 5,906 ft/s). Above a certain minimum impact velocity necessary to overcome target material strength parameters significantly, penetrator length is more important than impact velocity; as exemplified by the fact that the base model M829 flies nearly 200 m/s (656 ft/s) faster than the newer model M829A3, but is only about one half the length, wholly inadequate for defeating state-of-the-art armor arrays.[citation needed]

Complicating matters, when foreign deployment of military forces or export sales markets are considered, a sabot designed specifically to launch a DU penetrator cannot simply be used to launch a substitute WHA penetrator, even of exactly the same manufactured geometry. The two materials behave differently under high pressure, high launch acceleration forces, such that entirely different sabot material geometries, (thicker or thinner in some places, if even possible), are required to maintain in-bore structural integrity.[citation needed]

Often the greater engineering challenge is designing an efficient sabot to successfully launch extremely long penetrators, now approaching 80 cm (31 in) in length. The sabot, necessary to fill the bore of the cannon when firing a long, slender flight projectile, is parasitic weight that subtracts from the potential muzzle velocity of the entire projectile. Maintaining the in-bore structural integrity of such a long flight projectile under accelerations of tens of thousands of g's is not a trivial undertaking, and has brought the design of sabots from employing in the early 1980s readily available low cost, high strength aerospace-grade aluminums, such as 6061 and 6066-T6, to high strength and more expensive 7075-T6 aluminum, maraging steel, and experimental ultra-high strength 7090-T6 aluminum, to the current state-of-the-art and expensive graphite fiber reinforced plastics, in order to further reduce the parasitic sabot mass, that could be nearly half the launch mass of the entire projectile.[7]

The discarding sabot petals travel at such a high muzzle velocity that, on separation, they may continue for many hundreds of feet at speeds that can be lethal to troops and damaging to light vehicles. For this reason, tank gunners have to be aware of danger to nearby troops.

The saboted flechette was the counterpart of APFSDS in rifle ammunition. A rifle for firing flechettes, the Special Purpose Individual Weapon, was under development for the US Army, but the project was abandoned.


this is about a few thousand miles off, so i think im safe


The person acctualy lived there better be panicking or sum rn💀💀


Oh thank god you remember. I forgot what my Wi Fi password was.


why tf did you do this?what did I do to you man?I dont even know who you are 😂😂😂😂


Holy crap that house is less than a block from my cousin house


the hell real burger king commercial ads and im doxxed.....


Plot twist It's the person who made this video's house


Before this video I got the Burger King as 💀💀💀


I live there- seriously, and I just got doxxed  and it’s my bday 😂😂😂


rip the person that that has all of this information


I got a Burger King ad when I clicked this video


Why does his voice sound different when he is not doing the doxxed part?

Uberduck's model for the burger king ads is trained in such a way that if you give it the actual lyrics to one of the ads, it will generate a very close recreation of it. I used that to generate the first half and put it through the same steps as the doxxing part so that there was no difference in quality between them, and the transition is as seamless as possible. I couldn't get a good generation of the ending part, so I just applied the same steps to the actual vocals, and it turned out fine.


What if the one the ad is doxxing is the creator of this channel?


I got a burger King ad at the start of  this video and I thought it was the video


i got the original ad before this played and was very confused


I got a Burger King commercial actually right when I clicked on the video I got a Burger King commercial that I skipped it


i got a burger king ad before this played


I live an hour away in a similarly named town, i threw up in my mouth a bit when I thought I heard my town


My problem is that this is really close to where I do live


Person who lives there: <b>jokes on you I don't go there</b>

Person who lives there: *jokes on you I don't go there*


i hate these commercials so much, but this is ight


Ok, but what about the people that actually live there?


Watch the guy who actually lives there watches this video and has a heart attack


HOW DID YOU FIND ME ??? I THOUGHT I WAS UNFINDABLE


Nah bro the person who actually has this address is going to be like: Im just going to pretend I didn’t see my own location and wifi password in a single meme video


I got really nervous when it went to Illinois at first


what is the website you use to get voices


This video is probably revealing his own address and school he or she goes to


ah i've been found 😀 time for plan b <b>shotgun loading sound</b>

ah i've been found 😀 time for plan b *shotgun loading sound*


i got a Burger King ad before watching this video


How the hell did you actually find me? No seriously, I live there, raid me, whatever.


i got doxxed but all the information was far from true


why is it always Columbus when anyone tries to dox me


Ik it couldn't happen but I wanted it to be personalized


I though something was off when he said whopper


I live like 10 minutes away from there I'm not kidding 💀


Just got doxxed

Atleast they'll be able to get me my whoppers quicker


mfw this house is a block away  from mine:


Damnc middle schoolers wildin these days


honestly there should been of a knock sound


Not lying but when I clicked on the video I got a burger King ad


every time i see this i get a Lilttle nervous that it will be my address


did anyone notice the voice sounds normal?


i had a burger king ad before this video


Bruh i shit you not, what are the chances that i get a BK ad right before the video started


when that one random in apex legends says “i know where you live”


shit its...its all true...

charles they found us...


Lmao looked up the home address it's a donut shop or cake place or something


Let us know if this gets taken down.  Apparently someone's going around and abusing the "Hate speech" report category to get these parodies removed.


Oh my god I think that location is my cousins, I better check to make sure that nobody actually goes there


Okay, if that was me I'd say, cool now get over here.

𝕮𝖍𝖆𝖗𝖑𝖎𝖊 the fox dog 𝙋𝙕


the fact that you managed to land 6500 km from my home is really disturbing


i searched it up on google maps lol, it said bk recording studio lol


as a person who lives 0 seconds from that location, i am scared

nah i dont this was a shitty joke but im posting this anyways


i get it, you know where i live. no need to share it


At least you got my country. Close enough


Doxxing is a very VEEERY terrible idea.. 😔😔

Danganronpa Yes Gabby's Dollhouse No #FE2 #FoxArmy


BRO IS THIS SOME SCRIPT HOW DID IT FIND MY HOUSE


sorry burger king but im getting taco bell today


I’ve never seen this advert but is that the rabies pride flag?


I told you were i live to deliver me my whopper! not doxx me !!!!!


oh no I need to move now thanks video creator guy


BRUH I LIVE IN ILLINOIS I GENUINELY GOT SCARED


Soooo, that may or may not be my house.. also, I've changed the Wi-Fi password..


So, I found tried to find out who lives at this address, and the only turnout was a 74 year old woman named Patricia.. 😂


To be fair, they're from downstate IL, so their safety doesn't matter


Send this video to the person living there


Great, now I've got to change my password 🙄


What if the person who made this video used his information 🤨


Bro this guy got 1k subscribers in 1 week


i got sent this video by a random discord account except it was actually all my information


WAIT I ACTUALLY GOT FREAKED OUT BECAUSE I LIVE IN ILLINOIS


Dude a BK ad popped up before the vid and I was so confused


Dang I got a bk ad before the vid started I was like wait where'd the- oh


That was actually scary close to my address 😭😭😭


Bro just leaked his address Wi-Fi password and school 💀


Is it normal to get the bk ad before the vid?😅


I actually live an hour away from there, as a Chicagoan


It’s scary because I live near that place


That dude who has all of that information: 😱😳😰😰😰😰😰😰😰😰😰😰😰😰😰😰😰😰😰😰😰😰😰😰😰


Thanks man now I just gotta walk for 54 days 16 hours 24 minutes and 13 seconds to tell them they're ip is leaked


I saw columbia street and panicked so hard bro


bro I actually got a bk ad when I clicked on the vid lol


I saw “British” and got really fucking scared there


Lol that's where you live, you're doxing yourself


Dang guess I live so close to there, like 24 hours 😰

@mokey NO PLEASE NO LIAR NO ME NOT LIAR LAIR LIAR JOT ME


Bruh Google maps says that location is the BK headquarters now. It's got reviews n shit


Statistically at least one person has watched this video who attends/attended parkside junior high


The fact that this is down the street from me bothers me


How the fuck did this man know my WiFi password


oh god, this is literally my address, this dude just doxxed me...


bro what the fuck this is 11 mins away from me this actually scary😭😭😭


Omg they know some random kid's address. Too bad they can't find mine


Me getting doxed ajd having a thousand witches put spells in my house never give your address kids


Plot twist this is the creator's address


THAT IS THE REAL PLACE WHERE I LIVE?!?!?!?


How did you know my house address.

It’s a joke.


I didn't live there tho,

But i do live at-


Lol that's an actual Illinois IP address too.


I heard Illinois and got a little scared


I live 1d 2h from here and I got really scared


Dude thats literally down the street from me


here's the catch... i don't live in america.

Got em


why does the school look so depressing? not a tree in sight. literal box


Omg I actually got a fucking whopper ad before this video


How did you know?

Edit: no i actually live there


Wait How did you know where i live THATS WHERE I LIVE WTF???


I need to leave or get the police at my house


Live on the exact opposite side of the world

Totally


Bruh I got a bk ad trying to watch a bk vid💀💀💀💀💀


Something funny is I just got a bk ad before this vid


OMG I CLICKED THE VIDEO BUT THE BURGER KING AD CAME I THOUGHT IT WAS THE VIDEOS IT WAS JUST AN AD😢😅


i got scared because i live 2 hours from there wooh


Wait, does it change to yours bc this is my dox


No cause I got a real bk ad on this video 😭


I live literally 4 hours from this location


Lol that's funny kinda looks like my house

@mokey mokey you know nothing u no kno where I liv 😎


The only thing that links back to me is xfinity


shit scared be as soon as I herd "Columbine" cause I live hello close to his house


My auto english captions said "your going to have a seizure today"


bro the fact that this ip is a couple of doors away from my house ☠🙏☠🙏☠🙏<br>im moving as soon as i can

bro the fact that this ip is a couple of doors away from my house ☠🙏☠🙏☠🙏
im moving as soon as i can


The only think u said true was my wifi router


whats worse is that ip is a live one you can ping it rn and get a reply


Found the location and it’s a house also it’s near me😂

عبدالله محمد


wtf im like 2 minutes away from there lol


Omg but my little sister literally went to that junior high school wtf


Make one with every address until you find mine<br>Without the wifi

Make one with every address until you find mine
Without the wifi


This is so fake, he got everything correct except my Wi-Fi password. 💀


Why are you telling me what i already know? Thanks i guess


Shit shit shit time to move they're coming, they're coming!!!!!


bro i just got a bk ad before this I thought it was the video


Bruh that's the address for the BK headquarters


STOP DOXING ME ITS HAPPENED 10 TIMES BY NOW


Is it bad that I got the end of the ad as the ad at the start of the video… is it a sign


Someone definitely got into a heated argument over xbox


Hohoho I wanna find this people's house. <br>Getting their address and password for free wifi.

Hohoho I wanna find this people's house.
Getting their address and password for free wifi.


That’s not where I live, I live in California.


Also the guy who actually lives there: D:)


The algorithm brought you here.

Think about that.


Whoever lives at 108 E Columbi St. must be in a state of panic and shock.


well time to move out and change my wifi and pc I’ll also go to a different school ;-; (this is a joke)


Jokes on you. I already know where I live.


First, second I thought the video was an ad


Wait why is that all my shit on the screen....


cant wait for the meet and great of angry mobs usrrounding my house


I only live in one of the parts he doxxed which now im saying is pretty obvious its Illinois do not hunt me down u goofy lil timmy i see you there dont give me that look


PLEASE I LIVE HERE IM NOT JOKING IM FREAKING OUT


That address is like 12 minutes away from a old friend of mine


I LIVE 30 min awayyyyyyyy oh god save me


i didn't get doxxed, 0/10 false advertising


They guy who actually lives at 108 E Columbia Street: 👁👄👁


Thats very nice, that is your IP address, from your router.

Thats very nice, that is *your* IP address, from *your* router.


woah that ip kinda looks like mine..<br>wait...

woah that ip kinda looks like mine..
wait...


My teacher explaining 2nd person in 3rd grade


Me who not even live in America: nice try but no.


Bro I seen a video where the voice wasn't synced and now all I here is wapper wapper wapper wapper with no music


first ohio then illinois im from indiana so you are so close!


Ha. This guy could find me before the cops could 😎

@Adam Jensen the Benevolent I know when to take the L

Why would the cops need to find a zero threat basement dweller?


itzy day! #roadto10ksubs #ilikenumberblocks2023


how tf did you know my address and my info?


i live 13 mins away but i go to that school :sob:


wait, why is all my details there, ummm...


Someone tell me when that person clicks on this video


POV u live and use the same wifi and house as the vid  🔫😥 🩸


You actually found my address what da hail


I'm scared now i was about to watch it then I got one of there ads I'm scared now


the original ad sounds so awful compared to the daft punk version


Pov: you're a YouTuber who is slightly cringe on the internet


Haha funny burger King meme

The guy who watched this and his ip got leak on it: shock black guy

Haha funny burger King meme

The guy who watched this and his ip got leak on it: *shock black guy*


Ok, I went to Parkside Junior High School.  Now don’t make fun of me!!!


WAIT HE DOXXED ME PLS DON'T COME TO ME THAT'S ALL MY INFORMATION HOW DO U KNOW PLS LEAVE ME ALONE


why did you do this. stop doxxing me and others.


Bro when i saw illinois i got scared cuz i live in illinois


bottle of ice pop prime you found at walmart.


Bro aint no way he guessed my cousins location 💀💀


The school was accually right. Bro im scared.


me who uses SKY network and my password is myiqsucks WAIT WHAT WHY U STILL LOOKING


Roblox kid actually good at a game<br>Me:


What the actual fuck that's my address... damn


i live in california THATS (forogor) MILES AWYA


I actually live there !!!???!? 😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱


Also how do you know that address home address and wifi


As someone who lives over 4,000 miles (over 6437.376 km to trigger the ‘MURICANS) away from this I am scared 😮😮😮😮😮😮😮😮


Can u tell me how you got this?I wanna leak althea the tiktokers address...do it for me please


Is it a text to speech or you did this? (add your voice)


Umm dont kill me Ok? i dunno how u got that..


why is the german flag behind the whopper?


Guys.. Ik y’all probably don’t believe me but I actually live there. I EVEN GO TO THAT SCHOOL IM CRYING AND THATS HOW MY HOUSE LOOKS IM.. IDKK28WJIS YALL IK YU HUYS DONT WONT,PLBELIBE ME HUT IT IS WHERE I LIVE


What if someone whatched this and this was all real ther address wifi password and yea. Them: f*ck I got doxxed


AAAAAH I DO LIVE IN ILLINOIS STOP GROOMING MINORS


I’m 31 minutes away from you at commenting


Did you…. Did you AI generate the normal parts as well?<br>Why?! What’s the point???

Did you…. Did you AI generate the normal parts as well?
Why?! What’s the point???

so that there was no change in the quality of the audio and the transition was smoother


@thefirstbus i dont think i would call it an opinion

@neptu 🐾 firey pfp, your opinion is automatically irrelevant


Why did you call me out I guess it's time to move 😢youtube delete this video😢


WAIT THATS MY ACTUAL FUCKING ADDRESS WHAT THE FUCK😭


why what how the ip is almost similar and i live in IL😨


I went to the address and it’s a real address


That weird kid in the back of the school classroom


HAHA , YOU’RE WRONG,I ACTUALLY LIVE IN FRANCE,PARIS 4street of the peace

@Moonsun Bleach nah don’t worry I’m not that dumb

Why are you actually revealing where you live? You took a joke to seriously 😭


My friend lives there at the house and he goes to that school

@🍄Jimmy_Valmer🍄 yeah should i come over and see for myself?

Strange that you and thousands of other people know this person


@LegendGreninja but seriously how did you find my house???


BRO I LIVE RIGHT NEXT TO PARKSIDE IL SCHOOL🌝🌝🌝


a family lives there mom, dad, daughter mom has brown hair same as dad and kid is a light brown almost dirty blonde


I'm not joking sry, that's my address seriously


Why are they saying my address and house please delete


YOO THATSCLOSE TO ME ( I live In arkansas


i live in Washington so youre completly wrong


llıɹp ǝɥʇ ʍouʞ no⅄


@Aethrys can I use this video for an Idea of mine?

go nuts with whatever idea you have just don't steal this video


Uhhhhhhhh this guy just barely missed my house


Please, delete this video. <br>I don't wish for my location to be leaked, and if the wrong person sees this my family and I could get seriously injured.

Please, delete this video.
I don't wish for my location to be leaked, and if the wrong person sees this my family and I could get seriously injured.


WHAT THE HELL HOW DO YOU HAVE HIS NUMBER?!  THATS MY FRIENDS HOUSE


I ACTUALLY GOT A BURGER KING AD AT THE START 💀


All fake, I dont even live is the usa 😂😂😂


As someone who realistically lives 14 hours, 36 minutes from illinois.. (the distance between texas and illinois, 994.1 miles)
traveling to illinois would take long, but driving to that EXACT location might add 5 more hours. i dunno.
so yeah, why are people scared about the fact that there probably 3 U.S states from a location in a video.
unfunny joke


Not true i live at (enters adress and coordinates here)


How did you find this out… please stay away from my home sir


you but inccorrect loaction bro i live in Malaysia


@TheScottishPlaneSpotter Atleast I can live in my country without my people getting conquered and slaughtered like the sheep they breed with

@Adam Jensen the Benevolent Atleast He can enter a school without being shot


Listen there’s lots of people saying they live there and that’s really Cap and you’re one of them


No its not mine a dress plus I'm not gonna tell it so you can kidnap me


Wrong. I live in calle las magnolias 160 barranco, please rob that house that is definetly mine


I hear that you are incredibly annoying by the repetitive “joke”, and I get it. However. Spite.

I live just down the street, wtf 😥


@Littlemanguy 123 also at the end it says “B.K” for Burger King not “be gay”

@Littlemanguy 123 it’s A bone in the head known as the skull also I ment the one person that lived in that house...not the end

@Adam Jensen the Benevolent why are you hating on people just for liking the same gender that makes no sense it's not affecting you

@Littlemanguy 123 So? That's a good thing.


As someone who lives in 108 E Colombia street in Danvers Illinois (67132) I find this very offensive


you stole this video from insertusernamehere


Not even right content mate better luck next time 🤓


Jesus loves you alot trust in His death 4 salvation and be saved from eternal hell <3 Jesus died on the cross for you bro.


Bro how did you get my info I'm reporting this